Mimosa Gigabit Network Interface Device (NID)

Electrostatic discharge protection, exterior wall mounting, and reliable grounding point for installation requiring ethernet cabling

MSRP
$15.75  
USD

Tariff Fee

$2.50

SKU

100-00039

Weight

0.36 lb

Stock Quantity

1074 USA | 52 CAN

The Mimosa Gigabit NID is a sleek and cost effective surge protector, or arrestor, which has increased reliability with additional protection for electical systems alongside their established GDT's (Gas discharge tubes), reliable grounding point for any installation requiring Ethernet cabling, and is designed for exterior wall mounting, poviding outdoor technician access. Experience efficency and protection with the Mimosa Gigabit NID.

Increased reliability: Since Mimosa radios already have GDTs (gas discharge tubes) for suppressing ESD, the Mimosa NID adds additional protection for electrical systems. This means higher reliability for WISP operators, and fewer service calls. It’s also an ideal solution for areas that require installations to meet certain, local code requirements

Easy installation: In just a few minutes, a NID can be mounted, installed and connected. A shielded CAT6 or 6A ethernet cable goes into the NID, and then another CAT6 or 6A ethernet cable goes inside the house, or to the bottom of a tower, into a PoE injector. A 14 AWG or larger wire goes from the NID and connects to a ground rod.

Main benefits:
  • ESD protection between subscriber premise entry and the home
  • ESD protection between radios and the power source
  • Protects the power source and electrical equipment
  • Service interface for easily accessible troubleshooting
  • Cost-effective solution for every deployment
Max Throughput PTP: 700 Mbps IP
PTMP: 700 Mbps IP
Wireless Protocols Mimosa SRS; WiFi Interop
Modes PTP Backhaul; PTMP Client
Radio
MIMO and Modulation 2x2:2 MIMO OFDM, up to 256 QAM
Bandwidth 20/40/80 MHz channels, tunable to 5 MHz increments for Mimosa SRS and WiFi Interop mode
Frequency Range PTP / PTMP: 4900–6400 MHz (restricted by country of operation)
Max Output Power 27 dBm
Sensitivity (MCS0) -87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
Power
Max Power Consumption 9.2 W average; 12.9 W max
System Power Method Passive POE (24-56 VDC)
PoE Power Supply Passive POE compliant, 24-56 V Power over Ethernet supply (not included)
Physical
Dimensions Height: 175 mm (6.89”)
Width: 70 mm (2.75”)
Depth: 61 mm (2.40”)
Weight 0.4 kg (0.89 lbs)
RF Connector Type Mimosa N5-X twist-on
Enclosure Characteristics Outdoor, die-cast aluminum, UV stabilized paint
Mounting Dual attached pole mount straps
Grounding Ground lug
Wind Survivability 200 km/h (125 mph)
Environmental
Outdoor Ingress Protection Rating IP55
Operating Temperature -40°C to +55°C (-40°F to 131°F)
Operating Humidity 5 to 100% condensing
Operating Altitude 4,420 m (14,500’) max
Shock & Vibration ETS 300-019-2-4 class 4M5
Regulatory and Compliance
Approvals FCC Part 15.405 and Part 90Y CE/ETSI
EMI/Safety FCC Part 15 Class B EN 55022 Class B IEC61000 UL/IEC 60950-2 IEC/EN 60905-1
WEEE/ROHS Compliance Yes

Shopping Cart Share Cart


Loading...
Loading...

Thank you! We will be in touch shortly.