Mimosa B24 24GHz PTP Backhaul Radio Right Angled

Mimosa B24 24GHz PTP Backhaul Radio Bottom

Mimosa B24 24GHz PTP Backhaul Radio Back

Mimosa B24 24GHz PTP Backhaul Accessories

Mimosa B24 PTP Backhaul Radio

Unlicensed 24GHz, 1.5Gbps Aggregate UL / DL, 4x4:4 MIMO

MSRP

$1,023.75

USD

SKU

100-00074

Weight

8.6 lb

Stock Quantity

36 USA | 4 CAN

Download Datasheet

The Mimosa B24 point to point (PTP) backhaul radio delivers up to 1.5Gbps of aggregate speed in the less crowded and unlicensed 24GHz frequency band. By dynamically adjusting bandwidth based on upstream and downstream demand, the B24 efficiently delivers the most usable bandwidth possible with only 1ms latency, to meet modern internet traffic needs. The Mimosa B24 is revolutionizing the wireless industry, satisfying the needs of customers in multiple applications and verticals.

Product Applications

Fixed Wireless Broadband Backhaul
Business and MDU Rooftop Connections
Campus Building Interconnecting
Video Surveillance and WiFi Hotspot Distribution
Smart City Connectivity

Product Features

Gigabit Ethernet: 10/100/1000-BASE-T
Fiber Capable: Supports SFP interface for fiber operation
Ethernet Redundancy: Dual-Link failover; Does not support simultaneous Ethernet + fiber operation
Dual Protocol Operation: 2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256QAM
Management Services: Mimosa cloud monitoring and management SNMPv2 & Syslog monitoring HTTPS HTML5 based web UI (2.4GHz Wi-Fi management module no longer available as of February 2021)
Smart Spectrum Management: Active scan monitors/logs ongoing RF interference across channels with no service impact; Dynamic auto-optimization of bandwidth, power, and modulation
Security: 128-bit AES PSK with hardware acceleration
QoS: Supports 4 pre-configured QoS levels
GPS Location: GNSS-1 (GPS + GLONASS)
Collocation Synchronization: 1PPS GPS TX/RX synchronization for collocated co-channel radios; Adjustable up/downstream bandwidth ratio

Product Includes

Mimosa B24 24GHz Unlicensed Gigabit PTP Radio
Fine Adjustment Mounting Bracket
2x Mounting Bracket Bolts
2x Pipe Clamps
US Power Cord
PoE Injector
5mm Hex Wrench
IP67 Ethernet Gland
Fiber IP67 Gland
Dielectric Grease

Specifications B24

Gigabit Ethernet	10/100/1000-BASE-T
Fiber Capable	Supports SFP+ interface for fiber operation
Ethernet Redundancy	Dual Link failover; Does not support simultaneous ethernet + fiber operation
Security	128-bit AES PSK with hardware acceleration
QoS	Supports 4 pre-configured QoS levels
GPS Location	GNSS-1 (GPS + GLONASS)
Performance
Max Throughput	Up to 1.5 Gbps IP aggregate UL/DL
Max PHY rate	1.7 Gbps PHY
Low Latency	<1 ms
Supported MAC	TDMA, TDMA-FD
Radio
MIMO and Modulation	4x4:4 MIMO OFDM up to 256 QAM
Bandwidth	Single or dual channel; 20/40/80 MHz channel width
Channel Spacing	Single channel allows 5 MHz channel spacing; Dual channel allows separate, no-overlapping 5 MHz spacing increments
Frequency Range	24.05 - 24.25 GHz worldwide support; Operating range is 24.07 - 24.23 GHz
EIRP	~20 dBm (CE) ~33 dBm (FCC/IC) ~37 dBm (other regions)
Min Output Power	-20 dBm
Power Increment Level	1 dB
Sensitivity (MCS0)	-84 dBm @ 80 MHz -87 dBm @ 40 MHz -90 dBm @ 20 MHz
Antenna
Gain	33 dBi
Beamwidth (3dB)	3.0º
Elevation Adjust	+-2.5º azimuth mechanical adjust+-15º elevation mechanical adjust
Front to Back Ratio	>30 dB
Cross-Polar Isolation	>20 dB
Polarization	Dual-linear (slant 45º)
Power
Max Power Consumption	19.5 W
System Power Method	48V DC 802.3at compliant
System Lightning & ESD Protection	6 kV
PoE Power Supply	Passive POE compliant, 50V 1.2A power over ethernet (included)
Environmental
Outdoor Ingress Protection Rating	IP67
Operating Temperature	-40°C to +55°C (-40°F to 131°F)
Operating Humidity	5 to 100% condensing
Operating Altitude	4,420 m (14,500’) max
Shock & Vibration	ETS 300-019-2-4 class 4M5
Regulatory and Compliance
Approvals	FCC 15.249 IC RSS210 ETSI EN 300-440 V2.1.1 CE
RoHS Compliance	Yes; WEEE
Safety	EC/EN/ 60950-1
Physical
Dimensions	Height: 260 mm (10.24”)
Width	260 mm (10.24”) Depth: 134 mm (5.3”) without bracket; 252 mm (9.9”) with bracket Weight: 2.76 kg (6 lbs) including mount
Enclosure Characteristics	Outdoor UV stabilized plastic; Powder-coated, aluminum mounting panel
Wind Survivability	200 km/h (125 mph)
Wind Loading	12.52 kg @ 160 km/h (27.61 lbs @ 100 mph)
Mounting	Precision lightweight aiming pole mount with +-15º elevation and +-2.5º horizontal adjustment screws
Network Interfaces	Gigabit ethernet (RJ45) and gigabit fiber (SFP cage); Operation modes: Hot standby