Mimosa B11 PTP Backhaul Radio, 11 GHz

Mimosa B11 Point To Point (PTP) Backhaul Radio 11 GHz, 1.5 Gbps

MSRP

$2,099.00

USD

SKU

100-00036

Weight

9.12 lb

Stock Quantity

Call for availability

Download Datasheet

WAV supplies the B11 point to point (PTP) backhaul radio. As Mimosa’s first entry into the backhaul market, this radio is designed to be flexible to meet any bandwidth directional demands. It only takes one radio to cover an entire licensed 10.7 - 11.7 GHz spectrum, allowing for a faster deployment. The network design tools will give you a quick look into the connection by showing you nearby licensed links across the band via the FCC licensed database.

• Superior performance: with up to 1.5 Gbps aggregate speed and under 1 ms latency, high performance has never been this affordable. The B11 has the lowest cost per Mpbs in the industry with link distances over 100 km

• Ultra rugged: carrier grade IP67 design allows the B11 to withstand the harshest of environmental conditions

• Night and day: the B11 dynamically adapts to bandwidth demand using auto-TDMA technology, maximizing spectrum utilization throughout the day

• Monitor with rase: assessing link health and identifying potential problems has never been easier. Links are continuously monitored by our Mimosa cloud service with rich data collection and analysis

• right on target: Mimosa has taken the guesswork out of antenna aiming by adding 2.4 GHz Wi-Fi right in the radio, turning any smartphone into the most sophisticated aiming tool on the planet

Performance

Max Throughput	Up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY)
Low Latency	2+ ms
Wireless Protocols	TDMA, TDMA-FD

Radio

MIMO & Modulation	4x4:4 MIMO OFDM up to 256QAM
Bandwidth	Single or Dual 20/40/80 MHz channels
Frequency Range	10000-11700 MHz restricted by country of operation
Max Output Power	20 dBm (2-stream), 27 dBm (4-stream)
Sensitivity ( MCS 0 )	-87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz

Power

Max Powe Consumptionr	30W
System Power Method	48 V DC 802.3 at compliant power injectors
System Lightning & ESD Protection	6 Kv
PoE Power Supply	Passive POE compliant, 48-56 V Power over Ethernet supply with IEC6

Physical

Dimensions	Height: 260 mm (10.2") Width: 158 mm (9.6") Depth: 70 mm (2.8")
Weight	2 kg (4.5 lbs)
Enclosure Characteristics	Outdoor UV stabilized plastic Aluminum mounting panel
Wind Survivability	200 km/h (125 mph)
Wind Loading	9.89 Kg @ 160 km/h (21.8 lbs @ 100 mph)
Mounting	Circular Waveguide fed mounting bracket direct into antenna Optional Data Connector SFP Cage

Environmental

Outdoor Ingress Protection Rating	IP67
Operating Temperature	-40°C to +55°C (-40°F to 131°F)
Operating Humidity	5 to 100% condensing
Operating Altitude	4420 m (14500') maximum
Shock & Vibration	ETS 300-019-2-4 class 4M5

Features

Gigabit Ethernet	10/100/1000-BASE-T
Fiber Port	10/100/1000-BASE-T
Dual Protocol Operation	2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM
Management Services	Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI 2.4 GHz 802.11b/g/n radio for local management access Smart Antenna Alignment Hands-free dedicated 2.4 GHz Wi-Fi management radio alignment tool
Smart Spectrum Management	Active scan monitors/logs ongoing RF interference across channels (no service impact) Dynamic auto-optimization of channel and bandwidth use
Security	128-bit AES PSK with hardware acceleration
QoS	Supports 4 pre-configured QoS levels
Colocation Synchronization	1PPS GPS TX/RX synchronization for colocated co-channel radios Adjustable up/downstream bandwidth ratio
GPS Location	GNSS-1 (GPS + GLONASS)