Cambium Networks ePMP 5GHz Force 4525 SM 4-Pack
Priced Per Radio FCC US Cord
Tariff Fee
SKU
C058940M142A
Weight
7.8625 lb
Stock Quantity
48 USA
Service providers face ever-increasing demand for capacity in a limited amount of spectrum. The Force 4500 series of subscriber modules (SM) meet this demand by offering high performance and low latency across both point-to-multipoint and point-to-point deployments.
Product Features- High capacity and latencies less than 5 ms when using ePTP technology
- Proven air interface on top of 802.11ax technology
- Interoperability with the ePMP 4500 which uses MU-MIMO to achieve more than 4 Gbps per sector by transmitting to two ePMP 4500 SM’s simultaneously.
- 1024QAM and an integrated 25dBi dish antenna
- Multiple levels of QoS (Quality of Service) for voice, video and data applications supporting a wide variety of service packages for both residential and enterprise users
- Security features meeting the requirements of enterprise, industrial, government and service provider users
- Management by Cambium Networks cnMaestro element management system for easy provisioning, monitoring and upgrades
- Network planning with LINKPlanner and cnHeat
- 3-year hardware warranty and support from Cambium Networks
- Each SM comes with a Power over Ethernet injector and pole mount hardware included
| Channel Width MHz | 20 | 40 | 80MHz |
| Proprietary Physical Layer | Air Interface on top of 802.11ax technology (2x2 MIMO/OFDMA) |
| Channel Spacing | Configurable in 5MHz increments |
| Frequency Range | Wide Band Operation 5150–5920MHz (Note: Allowable frequencies and bands are dictated by individual country regulations.) Operation under AFC (Automatic frequency coordination) control in FCC jurisdictions. |
| MAC Layer (Media Access Control) | Cambium Proprietary |
| Ethernet Interface | 100/1000 BaseT, Compatible with Cambium PoE & Standard PoE pinouts |
| Protocols Used | IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH |
| Network Management | IPv4/IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks cnMaestro |
| VLAN | 802.1Q with 802.1p priority |
| ARQ | Yes |
| Nominal Receive Sensitivity (w/FEC) @20MHz Channel | MCS 0 = -91dBm to MCS 11 (1024QAM-5/6) = -59dBm (per chain) |
| Nominal Receive Sensitivity (w/FEC) @40MHz Channel | MCS 0 = -88dBm to MCS 11 (1024QAM-5/6) = -56dBm (per chain) |
| Nominal Receive Sensitivity (w/FEC) @80MHz Channel | MCS 0 = -85dBm to MCS 11 (1024QAM-5/6) = -53dBm (per chain) |
| Modulation Levels (Adaptive) | MCS 0 (BPSK) to MCS 11 (1024QAM-5/6) |
| Transmit Power Range | +3 to +28 dBm (combined, to regional EIRP limit) (1 dB interval) |
| QoS (Quality of Service) | Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority, MIR/CIR* support |
| Surge Supression* | 1 Joule Integrated |
| Environmental | IP55 |
| Temperature | -30°C to 55°C (-22°F to 131°F) |
| Weight | 2.76kg (6.1lbs) |
| Wind Survival | 200km/hour (124mi/hour) |
| Dimensions | (Dia x Depth) 472x472x296mm (18.5x18.5x11.7in) |
| Pole Diameter Range | Center: 3.1 to 7.6 cm (1.25 to 3.0 inches) |
| Power Consumption | 13W (Up to 15W in extreme cold temperatures when heater is activated) |
| Input Voltage | Passive PoE 27–59V |
| Encryption | All models: 128-bit AES (CCMP mode), 256-bit AES optional where allowed |
| FCCID | Z8H89FT0074 |
| FCC Regulatory Part # | C058940P142A |
| ETSI Regulatory Part # | C058940P142A |
| Industry Canada Cert | 109W-0074 |
| CE | See Cambium Website for Declaration of Conformity |
Related Products
SKU C058940A122A
SKU C058940A124A
SKU C058940A162A
Call for availability
SKU C058940A164A
Call for availability
SKU C058940M144A
SKU CYG-CPCNAC5-3FT
